Hogwarts Sock Swap Questionnaire
Second Years
1. What Hogwarts house have you been sorted into?
RAVENCLAW
2. Shoe size? Foot length? Foot circumference?
SHOE SIZE – 7-1/2, FOOT LENGTH 9”, FOOT CIRC. 8-1/2”
3. List your three favorite sock yarns.
a. vanCalCar Acres Flock Sock
b. merino
c. anything soft
4. Would you like to try a new brand of sock yarn? If so, which brand? I’ve used a limited selection, so anything nice!
5. Do you prefer variegated or solid sock yarn? I like solids, color tones, and long colorways
6. What colors would you like to add to your sock yarn stash? Happy colors – red, pink, yellow, oranage.
7. What kind of sock patterns do you gravitate toward? Lace? Ribbed? Fair Isle? I like lace and patterned.
8. Do you have any allergies? (smoke, animals, etc.)
No allergies, and I have 4 cats, and don’t smoke.
Friday, July 20, 2007
A Short Poem for a Sock
When yarn goes a little wonky,
Then it makes me slightly cranky,
But that's the way the knitting goes -
From cuff to heel, from heel to toes.
Then it makes me slightly cranky,
But that's the way the knitting goes -
From cuff to heel, from heel to toes.
Friday, July 6, 2007
Slow Bee, Humming
I've added the Mystery Stole 3 "Slow Bee" button. I've spent more time reading all the posts than I have knitting the stole. I did get up early this morning to work on it, only to have to frog back 4 rows - to row 35. The good news is that now I'm up to row 43. This is NOT a project I'm going to rush because it is too frustrating to make mistakes. If I keep my focus - no tv, no audio books, no cats on my lap - I do okay.
The good news is that as I sit and read all the posts, I do my mindless entrelac knitting on a tote for the Summer KAL CAL, and I've completed two tiers in two days!
On another tack, I do knit on my commute to and from work, usually on a pair of socks. I have noticed that sometimes people seem hesitant to sit next to me. While I'd like to think that maybe they are just being considerate and don't want to disturb me, or maybe they're intimidated by my plastic needles; I think the truth of the matter is that I hum to myself as I knit - not loudly, but it might be audible. I've turned into the crazy lady on the train!
The good news is that as I sit and read all the posts, I do my mindless entrelac knitting on a tote for the Summer KAL CAL, and I've completed two tiers in two days!
On another tack, I do knit on my commute to and from work, usually on a pair of socks. I have noticed that sometimes people seem hesitant to sit next to me. While I'd like to think that maybe they are just being considerate and don't want to disturb me, or maybe they're intimidated by my plastic needles; I think the truth of the matter is that I hum to myself as I knit - not loudly, but it might be audible. I've turned into the crazy lady on the train!
Labels:
knitting in public,
Mystery Stole 3,
Slow Bee,
Summer KAL CAL
Tuesday, July 3, 2007
Let There Be (Yarn) Cakes! (DIY Swift)
HOW TO MAKE A SWIFT – by Suzanne Ress
Supplies:
2 pieces of ¼” x 1-1/2” wood cut to 37-1/2 inches long, plus the end pieces that are left after the cut.
2 pieces of ¼” x 5” pegboard cut to
37-1/2 inches long
1 fencepost cap (to use as base)
1 piece of 3/8” threaded rod (it was precut, about 12 or 18 inches long)
At least 2 3/8”-spacer hex nuts (about 1-1/2” long, or longer), you can get more.
2 hex nuts for the top and bottom of the threaded rod (3/8”), one of them could be a wing nut.
A packet of washers (1/2”)
One nylon or plastic 5/8” spacer that is ½” to 5/8” long and has a ½” hole
Wood glue
3/8” doweling, cut into 3” pieces
C-clamp to hold swift to table
Supplies:
2 pieces of ¼” x 1-1/2” wood cut to 37-1/2 inches long, plus the end pieces that are left after the cut.
2 pieces of ¼” x 5” pegboard cut to
37-1/2 inches long1 fencepost cap (to use as base)
1 piece of 3/8” threaded rod (it was precut, about 12 or 18 inches long)
At least 2 3/8”-spacer hex nuts (about 1-1/2” long, or longer), you can get more.
2 hex nuts for the top and bottom of the threaded rod (3/8”), one of them could be a wing nut.
A packet of washers (1/2”)
One nylon or plastic 5/8” spacer that is ½” to 5/8” long and has a ½” hole
Wood glue
3/8” doweling, cut into 3” pieces
C-clamp to hold swift to table
Tools:
Drill with 3/8” and5/8” bits.
Staple gun with heavy-duty staples, at least 3/8”
Miter saw
T-square angle ruler
Assembly:
BASE:

Drill a 3/8” hole in the center of the fencepost cap.
Screw the threaded rod into the fencepost cap. Make sure it goes all the way through. If there is enough clearance underneath, add one of the hex nuts to the bottom of the rod.
Screw one of the long spacer hex nuts all the way down the threaded rod so that it snugs up to the fencepost cap and keeps the rod steady.
Screw the other spacer hex nut so that it is a couple of inches down from the top of the threaded rod (Note: I could only find two spacer hex nuts at Lowes, but if you want to add more to fill in the space from bottom to near the top on the threaded rod, you can).
SWIFT ARMS
Glue the pegboard onto the wood, making sure that the ends are even, and positioning the pegboard holes to be clear of the wood on either side.
Staple through the wood to hold the pegboard and wood together
Mark the center of each arm, measuring from end-to-end and across.

Drill a 5/8” hole at the center mark for each arm
To make braces to hold the swift arms at a 90° angle, use the miter saw assembly to cut a 45° angle at each end of the two leftover pieces of wood. IMPORTANT: make sure the angles are cut along the SAME long side of the piece of wood, so they both lean towards the center and towards each other.
Place one arm on top of the other, aligning the center holes. Put the nylon spacer in the hole to keep the arms lined up. Use the T-square on the bottom arm to square up the top arm.
Take one of the wooden braces and slide it against the wood, under the pegboard, with the short side of the brace towards the center of the swift. Since the pieces of wood for the arms are not even with each other, this has to be fiddled a bit. Mark the point on the arm and on the brace when the brace is set to hold both arms squarely. Put some glue on the brace and slide it back into place. Staple it on one arm of the two.
Repeat this on the “other” side of the swift arms, so the two braces are opposite each other.
Turn the arms over, and secure the brace to the “unsecured” arm.
To make life easier, I numbered the pegboard holes with indelible magic marker, to assist in even spacing of yarn hanks.
ATTACHING THE ARMS:
Put a washer on top of the spacer hex nut (you can add a nylon spacer on top of the hex nut, as I did) on the threaded rod.

Add the swift arms.
Fit the second nylon spacer over the threaded rod and through the center hole on the swift arms.
Add another washer on top of the swift arms.
Add the second hex nut or winged nut to the top. Screw it down to the swift arms, but DO NOT screw it down tightly. The arms should move freely.
SPACER DOWELS FOR YARN PLACEMENT:
Using the miter saw, cut the dowel into 3-inch pieces.
Use the pencil sharpener to sharpen one end of the dowel.
Push the dowel gently, using a twisting motion, into the holes in the pegboard to hold your skein of yarn. As I wound the skein, I found it loosened a little, so I kept readjusting the tension on the skein by moving the dowels.
NOTES:
As I wound yarn, the spacer nuts would loosen or move a little, so stop every once in a while and make sure that everything is secure.
Guarded by Dickens.
Sunday, June 17, 2007
A Taste for Lace
Despite my moaning about all the UFOs I have, I've gone and succumbed to 'startitis.' I joined the Mystery Stole 3 KAL. I've done enough lace knitting so that I 'understand' the concept, but I've never embarked on this large a project...but I'm not alone. Judging from the e-mails to the Yahoo group, there are alot of people who are developing a taste for lace, or are hoping to. So far there are over 1800 people signed up. There are actually shortages of Zepher yarn in white being reported, not to mention a run on beads. I don't think anyone anticipated this level of response.
Just to prove I can knit some lace:

Just to prove I can knit some lace:

this is a scarf I am currently working on. I adapted the Knitty pattern "Convertible" by Rebecca Hatcher. I've done some lacy socks...now I'm beginning to feel a bit overwhelmed at the thought of the shawl.
On the good news side - I won a book from Wiley, the publisher of "Charmed Knits" as part of the Charmed Knits KAL. Since I don't buy lottery tickets, I rarely win anything, actually, even if I do buy lottery tickets, I very rarely win. I was given a list of their craft books to chose from, and choose one on spinning. Winning could be dangerous.
Sunday, June 10, 2007
Not All Non-Knitters are Muggles
On May 30 my sister drove with me to Northampton, MA, to see Stephanie Pearl-McPhee, aka the Yarn Harlot. She drove so I could knit in the car. We stood in line chatting with knitters, we had more chat time in the theater, and we laughed and enjoyed outselves immensely during Stephanie's talk. During the Q&A, one woman asked "What were muggles?" Most of the audience responded in surprise. But Stephanie actually answered and told us all that muggles was an old word that Rowling had used in her books and it meant "someone outside a closely affiliated community." Is Stephanie the only one who knew that?
We went to WEBS, and I stood in line to have Stephanie sign my copy of "Cast Off," chatting all the while. The woman behind me pulled out a sweater she was knitting of Noro wool, and I truthfully said, "that was the best pattern I'd seen for Noro." She generously gave me the pattern. I promise I will knit it up.
Still basking in the glow of enjoyment, I was recently talking to my sister about the event, when she told me that as we were leaving the theater, she had made some comment to me about not having much interest in looking a wool, and the woman behind her, with whom she had been talking, said, 'Oh, you're a muggle." Her tone implied distain. My sister felt insulted. By the very fact that she was there, she was NOT a muggle. She may not knit, but she is a strong supporter of knitting. She respects knitters for their creativity and work; she appreciates hand knit items, and encourages her daughter to knit.
Any stereotype is dangerous and can be hurtful, so please consider who you're calling a muggle.
We went to WEBS, and I stood in line to have Stephanie sign my copy of "Cast Off," chatting all the while. The woman behind me pulled out a sweater she was knitting of Noro wool, and I truthfully said, "that was the best pattern I'd seen for Noro." She generously gave me the pattern. I promise I will knit it up.
Still basking in the glow of enjoyment, I was recently talking to my sister about the event, when she told me that as we were leaving the theater, she had made some comment to me about not having much interest in looking a wool, and the woman behind her, with whom she had been talking, said, 'Oh, you're a muggle." Her tone implied distain. My sister felt insulted. By the very fact that she was there, she was NOT a muggle. She may not knit, but she is a strong supporter of knitting. She respects knitters for their creativity and work; she appreciates hand knit items, and encourages her daughter to knit.
Any stereotype is dangerous and can be hurtful, so please consider who you're calling a muggle.
Labels:
colorwork,
dyeing yarn,
muggles,
Noro Yarn,
stereotypes,
Yarn Harlot
Tuesday, June 5, 2007
Variety is the Spice of Life, if it doesn't give you heartburn
My knitting progress has been like some just learning to drive a manual shift car...that uneven, jerking forward motion. I'm working on too many projects.
As I wait for the computer to boot up or load a new page, I work on my baby afghan for Afghans for Afghans. I'm using KnitPicks Yarn of the Andes - one strand of Amethyst and a second strand of another color (which changes every 3 rows, randomly). I was quite pleased to see that the result was a tweedy sort of blended striping. As I watch tv the Charmed Knits Beanie or the Orphans Foundations red scarf get some attention - I'm almost finished with the beanie.
I'm knitting three display items for the Fabric Place (my second, part-time job): a tank top (Classic Elite Cotton & pattern), a beaded ascot (Scarfstyle, Classic Elite Classic Silk), and a yet-to-be-started pair of socks.
As I wait for the computer to boot up or load a new page, I work on my baby afghan for Afghans for Afghans. I'm using KnitPicks Yarn of the Andes - one strand of Amethyst and a second strand of another color (which changes every 3 rows, randomly). I was quite pleased to see that the result was a tweedy sort of blended striping. As I watch tv the Charmed Knits Beanie or the Orphans Foundations red scarf get some attention - I'm almost finished with the beanie.I did finally pull together the yarn for the bag I will knit for the International Tote Exchange 4, but I'm still waiting for the sock yarn I ordered for the Hogwarts Sock Swap, and haven't made any decisions about my Sockapalooza socks. On one hand, when I'm knitting for someone else, I'd like to turn out something special and memorable, on the other hand, I keep telling myself that I have to choose something that I can finish by the deadline without losing my job, my mind, or my friends.
I'm not really complaining. I'm a process knitter, and enjoy having lots of different projects going. This way I can knit what I feel like knitting, and when I'm ready for a change, there is always something else to do. Since I like all the patterns and yarns, and I do have a streak of "project knitter" in me, I eventually do get stuff finished.
I've started dyeing yarn. I've only done two skeins, but I keep planning how the next colorway is going to go. My crockpot will probably get more use from dyeing than it ever got from cooking! Since I want to blend colors during the day with natural light, my next skein will get done this coming weekend.
Labels:
dyeing yarn,
process vs. project knitting,
projects
Subscribe to:
Posts (Atom)
